Netgear wgr614 user manual download

The passphrase is case-sensitive. The four key fields are automatically populated with key values. In the Passphrase field, enter a word or group of 8—63 printable characters. Figure 4. Click Apply to save your settings. Viewing Advanced Wireless Settings This section describes the wireless settings that you can view and specify in the Advanced Wireless Settings screen, which you access under Advanced in the main menu.

If you disable the wireless router radio, wireless devices cannot connect to the Wireless-G Router. If you will not be using your wireless network for a period of time, you can clear this check box and disable all wireless connectivity. Log in to the router as described in 2. Page Configuring The Wps Settings 6. Click Next. The following screen displays, and the Smart Wizard initiates the wireless connection: Figure 7.

Finally, use the WPS feature of the wireless client to establish a connection with the router. Refer to the wireless client documentation for instructions on completing this step. Configuring the WPS Settings 1. To restrict access based on MAC addresses: 1. Page 45 4. If the computer you want appears in the Available Wireless Cards list, you can select the radio button of that computer to capture its MAC address; otherwise, you can manually enter a name and the MAC address of the authorized computer.

You can usually find the MAC address on the bottom of the wireless device. Tip: Before changing the router password, back up your configuration settings with the default password of password. You can back up save this file and retrieve it later. If the router fails or becomes corrupted, or an administrator password is lost, you can easily re-create your configuration by restoring the configuration file. To allow inbound access to resources on your local network for example, a Web server or remote desktop program , you can open the needed services by configuring port forwarding as described in page You can find these features by selecting the items under Content Filtering in the main menu of the browser interface.

Select Block Sites under Content Filtering in the main menu. The Block Sites screen displays. Figure 2. Enable keyword blocking by selecting either Per Schedule or Always. To block by schedule, be sure to specify a time period in the Schedule screen. This is called service blocking or port filtering. Services are functions performed by server computers at the request of client computers. Specify a service for blocking by clicking Add.

The Block Services Setup screen displays. From the Service Type list, select the application or service to be allowed or blocked. The list already displays several common services, but you are not limited to these choices.

To schedule blocking: 1. Up to entries are stored in the log. Log entries appear only when keyword blocking is enabled and no log entries are made for the trusted user. To configure e-mail alert and web access log notifications: 1. Select E-mail under Content Filtering in the main menu. The E-mail screen displays. Enter your password for the e-mail server in the Password field. Select this check box for immediate notification of attempted access to a blocked site or service. The Device Name field cannot be blank.

Using the default addressing scheme, you should define a range between Click Apply to enter the reserved address into the table. Register for an account with one of the Dynamic DNS service providers whose names appear in the Service Provider list. Warning: DMZ servers pose a security risk.

A computer designated as the default DMZ server loses much of the protection of the firewall, and is exposed to exploits from the Internet. Secured NAT provides a secured firewall to protect the computers on the LAN from attacks from the Internet, but might prevent some Internet games, point-to-point applications, or multimedia applications from functioning. Page 65 In this case you must define a static route, telling your router that In the Route Name field, type a name for this static route.

This is for identification purposes only. Select the Private check box if you want to limit access to the LAN only. If Private is selected, the static route is not reported in RIP. The router still communicates with wire-connected LAN devices. Setting Up the Base Station The wireless repeating function works only in hub and spoke mode.

Page Setting Up A Repeater Unit Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless connection to the base station. Before forwarding your message to the remote computer, your router must modify the source information and must create and track the communication session so that replies can be routed back to your computer. The Web server at www. However, you might need to allow a client computer on the Internet to initiate a connection to a server computer on your network.

Normally, your router ignores any inbound traffic that is not a response to your own outbound traffic. From the Service Name list, select the service or game that you will host on your network. If the service does not appear in the list, see the following section, Service. Click Add Custom Service.

Figure 3. In the Service Name field, enter a descriptive name. In the Service Type field, select the protocol. In the Starting Port field, enter the beginning port number. Also, you need to know the number of the outbound port that will trigger the opening of the inbound ports.

Page 81 4. In the Port Triggering Timeout field, enter a value up to minutes. This value controls the inactivity timer for the designated inbound ports. The inbound ports close when the inactivity time expires. This is required because the router cannot be sure when the application has terminated. UPnP devices can automatically discover the services from other registered UPnP devices on the network. The advertisement period is how often the router broadcasts its UPnP information.

This value can range from 1 to minutes. The default period is 30 minutes. Shorter durations ensure that control points have current device status at the expense of additional network traffic. For best results, place your router: — Near the center of the area in which your computers will operate. Figure For convenience, the QoS Policy table lists many common applications and online games that can benefit from QoS handling.

Page 87 2. If not, click Add Priority Rule. The QoS - Priority Rules screen displays. In either case, a list of predefined applications or games displays in the Applications drop-down list. From the Priority drop-down list, select the priority that this traffic should receive relative to other applications and traffic when accessing the Internet. The options are Low, Normal, High, and Highest. From the main menu, under Advanced, click QoS Setup.

The QoS Setup screen displays, as shown in Figure on page 2. Page 91 Table Gigabit Ethernet can extend up to meters with twisted-pair wiring of Cat 5e or better. A wired connection is not susceptible to interference, and eavesdropping would require a physical connection to your network. A modem provides the internet connection via the internet provider.

A router then distributes the Internet signal to the devices connected to the router. What does the download speed on the internet depend on? The download speed on the internet depends on the type of connection you have. Is WIFI radiation harmful? WIFI is a radio frequency signal in the form of non-ionising radiation. This radiation cannot damage cells and tissues and is therefore not harmful to human health. What is the weight of the Netgear WGR?

The Netgear WGR has a weight of g. What is the height of the Netgear WGR? The Netgear WGR has a height of 28 mm. What is the width of the Netgear WGR? The Netgear WGR has a width of mm. What is the depth of the Netgear WGR? The Netgear WGR has a depth of mm. IEEE